ID:14257 WYSIWYG primitive "<name>" must not use regcascin port when not in register cascade mode
CAUSE: The specified WYSIWYG primitive is not in register cascade mode (that is, the REGISTER_CASCADE_MODE
parameter is set to OFF
), but uses the regcascin
port. The regcascin port must only be used in register cascade mode. Either the regcascin
port must not be used, or the REGISTER_CASCADE_MODE
parameter must be set to ON
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.