ID:14073 WYSIWYG primitive "<name>" must use all pterm (pterm0 - pterm4) ports when in XOR mode and when pexpout port is not used
CAUSE: The specified WYSIWYG primitive is in XOR mode (that is, the OPERATION_MODE
parameter is set to XOR
), and does not use the pexpout
port, but is not using any of the pterm
n (pterm0
- pterm4
) ports. All of the pterm
n ports must be used if the pexpout
port is not used and the WYSIWYG primitive is in XOR mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.