ID:14072 WYSIWYG primitive "<name>" must use pterm5 port when in XOR mode and in DFF mode, and when using the pexpout port
CAUSE: The specified WYSIWYG primitive is in XOR mode and DFF mode (that is, the OPERATION_MODE
parameter is set to XOR
and the REGISTER_MODE
parameter is set to DFF
), and uses the pexpout
port, but does not use the pterm5
port. The pterm5
port must be used if the pexpout
port is used and the WYSIWYG primitive is in XOR and DFF mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.