ID:14074 WYSIWYG primitive "<name>" cannot use pterm5 port when in XOR mode and when pexpout port is not used
CAUSE: The specified WYSIWYG primitive is in XOR mode (that is, the OPERATION_MODE
parameter is set to XOR
), and does not use the pexpout
port, but uses the pterm5
port. The pterm5
port must not be used if the pexpout
port is not used and the WYSIWYG primitive is in XOR mode.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.