ID:14084 WYSIWYG MCELL primitive "<name>" has illegal combination of mode parameters -- cannot be in XOR or XNOR mode, TFF mode, and parallel expander mode
CAUSE: The specified WYSIWYG MCELL primitive is in either XOR
or XNOR
mode (that is, the OPERATION_MODE
parameter is set to XOR
or XNOR
) and is also in TFF mode (that is, the REGISTER_MODE
parameter is set to TFF
) and parallel expander mode (that is, the PEXP_MODE
parameter is set to ON
). The TFF mode can be used only when the OPERATION_MODE
parameter is set to NORMAL
, INVERT
, or VCC
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.