ID:14040 WYSIWYG LCELL COMB primitive "<name>" must use all LUT input ports when in extended LUT mode
CAUSE: The specified WYSIWYG LCELL COMB primitive is in extended LUT mode (that is, the EXTENDED_LUT
parameter is set to ON
), but does not use all of the LUT input ports, which are the dataa
, datab
, datac
, datad
, datae
, dataf
, and datag
ports. Either the dataa
, datab
, datac
, datad
, datae
, dataf
, and datag
ports must all be used or the EXTENDED_LUT
parameter must be set to OFF
.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.