ID:14041 WYSIWYG LCELL COMB primitive "<name>" cannot use datag port -- datag port must be used only in extended LUT mode
CAUSE: The specified WYSIWYG LCELL COMB primitive is not in extended LUT mode (that is, the EXTENDED_LUT
parameter is set to OFF
), but uses the datag
LUT input port. The datag
port must be used only in extended LUT mode. Either the EXTENDED_LUT
parameter must be set to ON
, or the datag
port must be disconnected.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.