ID:101002 lpm_compare megafunction must use clock port when LPM_PIPELINE parameter is greater than 0, or when lpm_compare megafunction uses clock port, LPM_PIPELINE parameter must be greater than 0
CAUSE: You specified the LPM_PIPELINE
parameter or the clock port of the
MegaWizard Plug-In Manager
.
ACTION: If the LPM_PIPELINE
parameter has a value greater than 0
, use the clock port. If the clock port is specified, make sure the LPM_PIPELINE
parameter has a value greater than 0
. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager.