ID:95016 Cannot use OPERATION_MODE parameter value set to ROM with M-RAM block in altsyncram megafunction
CAUSE: You specified the RAM_BLOCK_TYPE
parameter of the altsyncram megafunction with the M-RAM value; however, the OPERATION_MODE
parameter value set to ROM
cannot be used with the M-RAM block. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Modify the design and use a different RAM_BLOCK_TYPE
parameter value, or set the OPERATION_MODE
parameter value to another value. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager. Use a different RAM_BLOCK_TYPE or change the mode.