ID:95003 Cannot use READ_DURING_WRITE_MODE_MIXED_PORTS parameter value set to OLD_DATA with M-RAM block in altsyncram megafunction
CAUSE: You specified the RAM_BLOCK_TYPE
parameter of the altsyncram megafunction with the M-RAM value; however, the READ_DURING_WRITE_MODE_MIXED_PORTS
parameter value set to OLD_DATA
cannot be used with the M-RAM block. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Modify the design and use a different RAM_BLOCK_TYPE
parameter value, or set the READ_DURING_WRITE_MODE_MIXED_PORTS
parameter value to DONT_CARE
. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager.