ID:95007 In altsyncram megafunction, clocken1 port can only be used when clock1 port is used
CAUSE: You connected the clocken1
port of the altsyncram megafunction; however, the clocken1
port can only be used when the clock1
port is connected. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Modify the design and connect clock1
port of the altsyncram
megafunction, or disconnect the clocken1
port. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager.