ID:84002 In altmult_add megafunction, NUMBER_OF_MULTIPLIERS parameter setting is <number>, but altmult_add megafunction cannot use scanouta or scanoutb when value of NUMBER_OF_MULTIPLIERS parameter is 3
CAUSE: In the altmult_add megafunction, you used the specified setting for the NUMBER_OF_MULTIPLIERS
parameter. However, the altmult_add megafunction cannot use the scanouta
or scanoutb
ports when the value of the NUMBER_OF_MULTIPLIERS
parameter is set to 3
.
ACTION: Change the value of NUMBER_OF_MULTIPLIERS
parameter to a value other than 3
, or do not use the scanouta
or scanoutb
ports.