ID:67004 WIDTH_MAN parameter of the altfp_inv megafunction has value <number> -- however, the WIDTH_MAN parameter value must be 23 and WIDTH_EXP parameter value must be 8 for single precision floating point format
CAUSE: You specified a value for the WIDTH_MAN
parameter of the altfp_inv megafunction. When the WIDTH_MAN
parameter has the specified value, the altfp_inv megafunction assumes that you want single precision floating point format. The WIDTH_MAN
parameter must be set to 23 and the WIDTH_EXP
parameter must be set to 8 for single precision floating point format. This error usually occurs when you instantiate a megafunction directly in a design file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Change the value of the WIDTH_MAN
parameter to 23 and the value of the WIDTH_EXP
parameter to 8 of the altfp_inv megafunction for single precision floating point format.