ID:16482 Cannot use <name> port when parameter <name> is less than or equal to 1
CAUSE: You specified a value for the WIDTH_BYTEENA
parameter of the altera_syncram megafunction and used the byteena
port; however, the byteena
port can only be used if the WIDTH_BYTEENA
parameter value is greater than 1
. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the IP Parameter Editor.
ACTION: Modify the design and disconnect the byteena
port, or specify a WIDTH_BYTEENA
parameter value that is greater than 1
. To avoid receiving this message in the future, Intel recommends using the IP Parameter Editor.