ID:50000 Parameter error: sset and sclr are not supported when using <value> device family
CAUSE: You specified the sset
or the sclr
parameter of the altddio_in
megafunction. When using the altddio_in
megafunction with the specified device family , the sset
or the sclr
parameter are not supported. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the
MegaWizard Plug-In Manager
.
ACTION: Change the device family, or remove the sset
or the sclr
parameter(s). To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager.