Input Ports

text-align:left;

Port Name	Required	Description	Comments
scein	Yes	Active low chip select signal to the serial flash device.	Only present when the `ENABLE_SHARED_ACCESS` parameter is set to `"ON"`.
dclkin	Yes	The data presented on `sdoin` is latched to the serial flash device at the rising edge of `dclkin`. Data on `data0out` changes after the falling edge of `dclkin`.	Only present when the `ENABLE_SHARED_ACCESS` parameter is set to `"ON"`.
sdoin	Yes	Used to transfer data serially into the serial flash device. `sdoin` is latched in the rising edge of `dclkin`.	Only present when the `ENABLE_SHARED_ACCESS` parameter is set to `"ON"`.
noe	Yes	Active low output enable of the serial flash interface.	Always present.
asmi_access_granted	Yes	Active high input. Indicates the serial flash interface is free to be used by the Serial Flash Loader.	Only present when the `ENABLE_SHARED_ACCESS` parameter is set to `"ON"`.