run (::quartus::stp)
The following table displays information for the run
Tcl command:
Tcl Package and Version | Belongs to ::quartus::stp 1.0 |
||||
Syntax | run [-h | -help] [-long_help] [-check] [-data_log <data log>] [-device_name <device name>] [-hardware_name <hardware name>] [-instance <instance>] [-signal_set <signal set>] [-timeout <timeout>] [-trigger <trigger>] |
||||
Arguments | -h | -help |
Short help | |||
-long_help |
Long help with examples and possible return values | ||||
-check |
Option to check with last compilation result | ||||
-data_log <data log> |
Name of data log to be recorded | ||||
-device_name <device name> |
Device to use instead of the one specified in the stp file. Tcl command, get_device_names, can be used to obtain the valid hardware names | ||||
-hardware_name <hardware name> |
JTAG programming hardware to use instead of the one specified in the stp file. Tcl command, get_hardware_names, can be used to obtain the valid hardware name | ||||
-instance <instance> |
Name of instance that defines data acquisition | ||||
-signal_set <signal set> |
Name of signal set that defines data acquisition | ||||
-timeout <timeout> |
Timeout period for data acquisition in seconds | ||||
-trigger <trigger> |
Name of trigger that defines data acquisition | ||||
Description |
|
||||
Example Usage |
|
||||
Return Value | Code Name | Code | String Return | ||
TCL_OK | 0 | INFO: Operation successful | |||
TCL_OK | 0 | INFO: Data has been acquired successfully | |||
TCL_ERROR | 1 | ERROR: JTAG chain in use. Wait for JTAG communication to finish and run again. | |||
TCL_ERROR | 1 | ERROR: Data acquisition stopped unexpectedly. Make sure device is stable and run again. | |||
TCL_ERROR | 1 | ERROR: Trigger not compatible with device. Download a design with the current SRAM Object File after recompiling. | |||
TCL_ERROR | 1 | ERROR: Instance, signal set, or trigger does not exist. Make sure the instance, signal set, and trigger exist in the SignalTap II File. | |||
TCL_ERROR | 1 | ERROR: Session has not been opened. Make sure a session is open before attempting to close it. | |||
TCL_ERROR | 1 | ERROR: Trigger did not occur in timeout period. Make sure trigger conditions are valid and/or increase timeout period. |