report_net_timing (::quartus::sta)
The following table displays information for the report_net_timing
Tcl command:
Tcl Package and Version | Belongs to ::quartus::sta 1.0 |
||||
Syntax | report_net_timing [-h | -help] [-long_help] [-append] [-file <name>] [-nworst_delay <number>] [-nworst_fanout <number>] [-panel_name <name>] [-stdout] <name> |
||||
Arguments | -h | -help |
Short help | |||
-long_help |
Long help with examples and possible return values | ||||
-append |
If output is sent to a file, this option appends the result to that file. Otherwise, the file will be overwritten. This option is not supported for HTML files. | ||||
-file <name> |
Sends the results to an ASCII or HTML file. Depending on the extension | ||||
-nworst_delay <number> |
Report worst net delays | ||||
-nworst_fanout <number> |
Report worst fanout nets | ||||
-panel_name <name> |
Sends the results to the panel and specifies the name of the new panel | ||||
-stdout |
Send output to stdout, via messages. You only need to use this option if you have selected another output format, such as a file, and would also like to receive messages. | ||||
<name> | Signal or collection name | ||||
Description |
|
||||
Example Usage |
|
||||
Return Value | Code Name | Code | String Return | ||
TCL_OK | 0 | INFO: Operation successful | |||
TCL_ERROR | 1 | ERROR: Options -<string> and -<string> are mutually exclusive. Specify only one of the two options. | |||
TCL_ERROR | 1 | ERROR: You must open a project before you can use this command. | |||
TCL_ERROR | 1 | ERROR: Timing netlist does not exist. Use create_timing_netlist to create a timing netlist. | |||
TCL_ERROR | 1 | ERROR: Neither of options -<string> or -<string> is specified. Specify one of the two options. |