load_report (::quartus::report)
The following table displays information for the load_report
Tcl command:
Tcl Package and Version | Belongs to ::quartus::report 2.1 |
||||
Syntax | load_report [-h | -help] [-long_help] [-simulator] |
||||
Arguments | -h | -help |
Short help | |||
-long_help |
Long help with examples and possible return values | ||||
-simulator |
Option to load the Simulation Report. If this option isn't specified, the Compilation Report is loaded instead. | ||||
Description |
|
||||
Example Usage |
|
||||
Return Value | Code Name | Code | String Return | ||
TCL_OK | 0 | INFO: Operation successful | |||
TCL_ERROR | 1 | ERROR: Can't load report for revision: <string>. A different, active revision already exists: <string>. To specify another active revision name, type set_current_revision <string>. | |||
TCL_ERROR | 1 | ERROR: Can't find active revision. Specify an active revision name using set_current_revision <string>. | |||
TCL_ERROR | 1 | ERROR: Can't find active revision. Specify an active revision name using set_current_revision <revision name>. | |||
TCL_ERROR | 1 | ERROR: Revision name does not exist: <string>. Run Analysis & Synthesis (quartus_map) with the specified revision name before using this Tcl command. | |||
TCL_ERROR | 1 | ERROR: Compilation database is newer than the last call to create_timing_netlist. Use the delete_timing_netlist Tcl command before using <string>. | |||
TCL_ERROR | 1 | ERROR: You must open a project before you can use this command. | |||
TCL_ERROR | 1 | ERROR: Can't load report data for revision name: <string>. Make sure the report database exists for the specified revision name. | |||
TCL_ERROR | 1 | ERROR: Existing report was not unloaded. Ensure that your load_report commands have matching unload_report commands. |