SSN Analyzer Page (Settings Dialog Box)

This feature only supports the Quartus® Prime Standard Edition. You open this dialog box by clicking SSN Analyzer in the Settings dialog box.

Allows you to specify the depth of each via breakout layer that connects pins to routing layers of the circuit board.

  • Use default thicknesses for current device and package—Specifies that all signals break out on a single layer of the PCB, at a thickness of 1.8 mm (70.8 mil).
  • Use customized layer thicknesses—Allows you to specify the number of via breakout layers on the PCB and the thickness (in millimeters or thousandths of an inch) of the PCB between each breakout layer.
Scripting Information