Report Minimum Pulse Width Dialog Box

You generate this report with default settings by double-clicking Report Minimum Pulse Width under the Individual Reports folder in the Tasks pane in the TimeQuest Timing Analyzer.You generate this report with custom settings by clicking Report Minimum Pulse Width under the Custom Reports folder on the Reports menu of the TimeQuest analyzer.

Allows you to configure and display a report about the slack times of the high and low minimum pulse width restrictions imposed by limitations of the current target device. Use minimum pulse width analysis for proper operation of sequential circuits, by ensuring that clock transitions are observed at sequential elements.

The TimeQuest analyzer verifies that your design meets all specified timing constraints and reports the results in the Report pane and the Console. The Fitter uses timing constraint information to optimize placement of the design in the target device.

If you use the Report Minimum Pulse Width command under the Individual Reports folder in the Tasks pane, the TimeQuest analyzer generates a default report labelled Minimum Pulse Width with a default number of pulse width checks of 100. If you use the Report Minimum Pulse Width command under the Custom Reports folder on the Reports menu, you can configure the following settings.