Performing a Timing Simulation with the ModelSim-Intel FPGA Edition Software
You can perform a timing simulation of a Verilog HDL, SystemVerilog HDL, or VHDL design with the Mentor Graphics ModelSim-Intel FPGA Edition software from the ModelSim-Intel FPGA Edition interface or with command-line commands.
Important: Intel recommends that you set Time scale settings to picoseconds (ps) in the interface or with command-line commands when performing timing
simulation.
Note: For more information about using EDA simulators, refer to Mentor Graphics ModelSim and QuestaSim Support in the Quartus® Prime Handbook.
If you want to perform power
analysis, proceed to perform power analysis with the PowerPlay Power Analyzer.