The Fitter generates the following reports when you use incremental compilation for all partitions, including automatically created partitions. The exact reports that appear are based on settings you specify in the Settings dialog box. Reports are generated for all design partitions, including automatically created design partitions.
Summarizes the results of design-wide placement and routing preservation and also the feature used to achieve that preservation, such as design partition or rapid recompile. For placement, the report lists the requested and achieved preservation in terms of node count (percentage and actual number). For routing, the report lists the requested and achieved preservation in terms of connections (percentage and actual number). The report also lists the number of tiles locked to High-Speed.
Lists the following information for each design partition: design partition name, partition type, netlist type, the Fitter preservation level, the netlist type requested, and the contents for all design partitions.
Lists the following information for each design partition: the partition name, number of nodes, number of preserved nodes, preservation level, the netlist type for all design partitions, and the preservation method used (design partitions or rapid recompile).
Lists the results of routing preservation for connections between design partitions. The results include the designations for each design partition, the amount of connection preservation requested, the connection preservation achieved, and the preservation method used (design partition or rapid recompile).
Lists the LogicLock region name; associated total partitions; the requested origin, width, and height settings of the LogicLock region; and the effective origin, width, and height settings of the LogicLock region.