The Add SignalProbe Pin dialog box allows you to create assignments for SignalProbe pins, including the node name, pin location, and source for a pin. You can specify the following settings when creating SignalProbe connections:
- Source node name—Specifies the signal name that you want to route to the SignalProbe output pin in the Current and potential SignalProbe pins list.
 Scripting
Information |
|
Keyword: reserve_pin Settings: "as signalprobe output" |
- Pin location—Specifies the pin name for the first available pin. The list shows all available pin locations.
- SignalProbe pin name—Specifies the node name that you want to assign to the pin selected in the SignalProbe pins list.
- Clock—Specifies the clock signal name to use as a clock to register the output of the SignalProbe node. You must specify a clock signal name and the number of registers to use if you want to register the output of the SignalProbe node.
|
Scripting
Information |
|
Keyword: signalprobe_clock Settings: <signalprobe clock name> |
- Registers—Specifies the number of registers to insert before the output of the SignalProbe pin. You must specify the number of registers to use and a clock signal name if you want to register the output of the SignalProbe node.
|
Scripting
Information |
|
Keyword: signalprobe_num_registers Settings: <integer number of registers> |