ISP CLAMP State Editor Window (File Menu)

You open this window by selecting an I/O Pin State File Definition (.ips) in the Programmer and clicking ISP CLAMP State Editor in the Edit menu. If you open the ISP CLAMP State Editor using the ISP CLAMP State Editor command, the Select Device and Open IPS File buttons are unavailable.

Allows you to create I/O Pin State Files describing the ISP CLAMP state for device pins used at the start of programming or other optional action, such as verification. Some of the options described below may be available only when certain conditions are met. For example, you may need to select a certain programming mode.

Note: You can use I/O Pin State files only when you turn on ISP CLAMP. The IPS File list is in the Programming list.

Pin:

Lists the pins on the device specified in the Device box.

ISP CLAMP State:

Allows you to specify the ISP CLAMP state for pins on the device specified in the Device box. To edit an ISP CLAMP State cell, click in the cell or select a row and click Change State. Pins with an ISP CLAMP state of locked are non-bonded pins and cannot be edited.

You can specify one of the following four pin-states for individual pins to assume at the start of programming or other optional action, such as verification:

Tri-state— At the start of programming, or other optional action, the pin is tri-stated. Tri-state is the default state for all pins.
High— At the start of programming, or other optional action, the pin is driven high.
Low— At the start of programming, or other optional action, the pin is driven low.
Sample and Sustain— The pin state is sampled prior to entering ISP, and that state is applied and maintained during the ISP operation.

Select Device:

Opens the Select Devices dialog box, which allows you to add devices to the programming list in the Programmer.

Open IPS File:

Allows you to open an I/O Pin State File for the device specified in the Device box.

Change Name:

Allows you to edit the Name of the selected pin for the device specified in the Device box.

Change State:

Allows you to edit the ISP CLAMP State of the selected pin for the device specified in the Device box.