List of Messages |
CAUSE: You opened a design that targets the specified device family, but you did not install device support for the family in the Quartus Prime software. The Compiler automatically choosing an appropriate device. The Quartus Prime software is asking if you want to remove all location assignments for the previous device.
ACTION: Click Yes to delete all location assignments, or click No to leave the location assignments unchanged. If you do not delete the location assignments, some assignments may not function properly in the device or device family chosen by the Compiler. If the device chosen by the Compiler is appropriate for the design, then no further action is required. If you want to target a device or device family for which you have not installed support, you can reinstall the Quartus Prime software to add additional device support. You should also make sure that your license file is up-to-date and supports the device family that you want to install. Contact Altera Applications or go to the Altera web site for more information.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.