List of Messages |
CAUSE: The Quartus Prime software is unable to simulate the I/O buffer for the specified pin because the signal swing at the near-end or far-end did not cross the VMEAS point for the I/O standard. As a result, the Quartus Prime software will use the default board trace model for the I/O buffer.
ACTION: Specify a different board trace model for the specified pin.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.