| List of Messages | |
CAUSE: You defined the specified numerical value for a state in a state machine in a design file. The numerical value has more bits than you declared for the state, and therefore the value cannot fit in the state. This message can occur if you use a binary string with the wrong radix. The Quartus Prime software attempted to fit the value into the state by removing from the value the MSB and as many adjacent bits as necessary. However, in removing the bits, the Quartus Prime software changed the value.
ACTION: Make sure the numerical value you assigned is correct and uses the correct radix. If the value is correct and you do not want the Quartus Prime software to remove any bits from the value, declare more state bits for the state.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.