List of Messages |
CAUSE: You set the specified SignalTap II or debug node instance to enabled, but the SignalTap II Logic Analyzer is not supported for the selected device family. As a result, the Quartus Prime software is ignoring the enable status for the SignalTap II or debug node instance.
ACTION: Specify a device family that supports the SignalTap II Logic Analyzer.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.