List of Messages |
CAUSE: You connected the specified port in the specified macrofunction, but you did not declare a range for the port. As a result, the Quartus Prime software will connect the port to pin \"%2!s!\" because the pin is a member of a single bit bus with the same name as the port.
ACTION: No action is required. If this is not what you intended and you created the file in the Quartus Prime software, modify the macrofunction so that the range of the port in the macrofunction matches the range of the port in the design.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.