List of Messages |
CAUSE: You requested a power estimate. However, the PowerPlay Power Analyzer has no power model for the target device family. No power estimate will be produced for the current design.
ACTION: To stop this message, use the --estimate_power=off command line option. To estimate power for the current design, use the PowerPlay Early Power Estimator spreadsheet. You can use the Power Analyzer to write a design summary file to be imported by the Early Power Estimator. To create the design summary file from the command line, run quartus_pow with the --output_epe command line option. Alternately, use Generate PowerPlay Early Power Estimator File command on the Project menu.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.