| List of Messages | |
CAUSE: You attempted to set the Fitter preservation level property of a partition to a value that is not supported. The setting you want may not be supported by the Quartus Prime software, by the currently selected device, or by the current partition.
ACTION: If you receive this message while trying to modify the setting in the Quartus Prime user interface, no action is required because the new setting has been ignored by the Quartus Prime software. If you receive this message after manually editing the Quartus Prime Settings File (.qsf) for the project, you should remove the setting from the Quartus Prime Settings File to avoid seeing this message again.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.