List of Messages
Parent topic: List of Messages

ID:138070 Updated the "Netlist Type" of partition "<name>" from "Post-Fit (Strict)" to "Post-Fit". The "Post-Fit (Strict)" setting is deprecated in the current release of the Quartus Prime software. To force strict netlist types use the "Ignore changes to source files" setting.

CAUSE: You attempted to set the netlist type assignment of the specified partition to Post-Fit (Strict), but the Post-Fit (Strict) setting is not supported in the current release of the Quartus Prime software.

ACTION: To set to set the netlist type assignment of the specified partition to Post-Fit (Strict), go to the Advanced tab in the property sheet window of the partition, and then enable the Ignore changes to source files setting. Otherwise, no action is required.

Parent topic: List of Messages

Contact Altera | Legal Notice

Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.