| List of Messages | |
CAUSE: You have attempted to set the Netlist Type for a partition to a setting that is not supported. The setting may not be supported by the Quartus Prime software, by the currently selected device, or by the current partition.
ACTION: If you see this message while trying to modify the setting in the Quartus Prime user interface, no action is required because the new setting is ignored by the Quartus Prime software. If you see this message after manually editing the Quartus Prime Settings File (.qsf) for the project, you may want to remove the setting from the QSF to avoid seeing this message again.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.