List of Messages |
CAUSE: In a Graphic Design File (.gdf), the specified output pin is not connected to a source signal. The Quartus Prime software will connect the output pin to GND.
ACTION: To avoid receiving this message in the future, or if you do not want the Quartus Prime software to connect the pin to GND, connect the pin in the design to a source signal, or delete the pin if it is not used. Otherwise, no action is required.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.