List of Messages |
CAUSE: The Fitter could not achieve the specified compensation delay for the specified PLL. This can occur if I/O delay chain assignments were made to I/Os compensated by the PLL which conflict with the compensation mode of the PLL.
ACTION: Modify or remove I/O delay chain assignments for I/Os compensated by the PLL, or change the compensation mode of the PLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.