List of Messages |
CAUSE: The specified SERDES receiver is not using the dynamic phase alignment (DPA) with the specified differential I/O data rate. However, the DPA must be enabled to support the specified differential I/O data rate.
ACTION: Modify the design so that the differential I/O data rate is less than or equal to the specified maximum differential I/O data rate for non-DPA channels of the target device, or enable DPA for the specified SERDES receiver. Refer to the Package Skew Compensation report panel under Fitter report to compensate for skew.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.