List of Messages |
CAUSE: You assigned the Global Signal option for the specified port and index of the specified signal. However, the inputs to a Clock Control Block must use the same global signal type. As a result, the Fitter used the Global Signal option assignment for the lowest port index for all the inputs to that Clock Control Block.
ACTION: No action is required. To avoid receiving this message in the future, remove the Global Signal option assignment for the specified signal, or make sure all the inputs to a single Clock Control Block use the same global signal type.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.