List of Messages |
CAUSE: The specified pins either have nothing, GND, or VCC driving the datain port. If you modify this setting, additional pin placement restrictions such as simultaneously switching outputs may be necessary and may lead to a change in the fitting results.
ACTION: If you do not intend to connect these pins, no action is required. Otherwise, modify the design to reflect the required connectivity.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.