List of Messages |
CAUSE: You've turned on the ADC block(s) usage and assigned I/O pin(s) to be placed near to ADC pins. The target device do not allow these I/O pin(s) to be placed near to ADC pin(s).
ACTION: Please reassign the pin assignment further away from ADC pins and re-run the compilation again.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.