List of Messages |
CAUSE: The jitter or uncertainty values used in the ALTMEMPHY timing analysis for the memory interface depend on a specific circuit topology.
ACTION: To obtain accurate jitter or uncertainty values, you must change the design so that the source PLL, which is feeding the PLL, has the compensation mode set to the correct setting.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.