List of Messages |
CAUSE: The specified PLL has one or more of the reconfiguration ports connected, but the PLL does not use reconfiguration. When using PLL reconfiguration, the scandata port must be connected.
ACTION: If you want to use PLL reconfiguration, connect the scandata port of the specified PLL. Otherwise, disconnect the unused reconfiguration ports of the PLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.