List of Messages |
CAUSE: The specified PLL is using the clkswitch port in manual switchover mode, but the clkswitch port is not connected or is stuck at a constant VCC or GND. As a result, switching between the input clocks will not be possible.
ACTION: Connect the clkswitch port or do not use manual switchover.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.