List of Messages |
CAUSE: The specified gated lock counter value of the specified PLL is less than the recommended value. This might result in the lock signal toggling a few times before becoming stable. This might cause the PLL self-reset on loss of lock feature to behave incorrectly.
ACTION: Set the gated lock counter to at least the recommended value. This is necessary for the PLL self-reset on gated-lock-loss feature to behave correctly.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.