List of Messages |
CAUSE: You tried to use the inclk0 and inclk1 ports with the specified PLL, but the clkswitch port is not connected. To initiate a clock switchover, the PLL must have the clkswitch port connected.
ACTION: To avoid receiving this message in the future, modify the design so that the clkswitch port is connected, or disconnect the unused inclk1 port.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.