List of Messages |
CAUSE: You specified an enhanced PLL that uses the inclk0 and inclk1 ports, but the clkswitch port is not connected, and the SWITCH_OVER_ON_LOSSCLK or SWITCH_OVER_ON_GATED_LOCK parameter is set to OFF. To initiate a clock switchover, the enhanced PLL must have the clkswitch port connected, or set the SWITCH_OVER_ON_LOSSCLK or SWITCH_OVER_ON_GATED_LOCK parameter to ON. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager to modify the design so that the clkswitch port is connected, or set the SWITCH_OVER_ON_LOSSCLK or SWITCH_OVER_ON_GATED_LOCK parameters to ON.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.