List of Messages |
CAUSE: The PHASE_SETTING parameter of the specified I/O clock divider block is larger than the value of the DELAY_CHAIN_LENGTH parameter of the specified delay-locked loop (DLL).
ACTION: Check the design and make sure that the PHASE_SETTING parameter of the specified I/O clock divider block is not larger than the DELAY_CHAIN_LENGTH parameter of the specified DLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.