List of Messages |
CAUSE: The PHASE_SETTING parameter of the specified DQS enable control primitive is larger that of the specified delay-locked loop (DLL).
ACTION: Change the PHASE_SETTING parameter of the specified DQS enable control primitive or the specified DLL or both, so that the PHASE_SETTING parameter of the DQS enable control primitive is less than that of the delay-locked loop (DLL).
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.