List of Messages |
CAUSE: The reconfig_fromgxb output port of the specified alt2gxb megafunction is in Channel Reconfiguration mode or Channel and TX PLL Select Reconfig mode. These reconfiguration modes require that the reconfig_fromgxb output port is connected to an alt2gxb_reconfig megafunction. The output port cannot be disconnected or connected to any other logic.
ACTION: Connect the reconfig_fromgxb output port of the specified alt2gxb megafunction to an alt2gxb_reconfig megafunction.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.