List of Messages |
CAUSE: You turned on fitter netlist optimizations, however, the Quartus Prime software cannot perform fitter netlist optimizations when more than the specified number of LEs are back-annotated.
ACTION: If you want to use fitter netlist optimizations on the design, remove some location assignments. If you want to back-annotate a design after using fitter netlist optimizations, you must generate a Verilog Quartus Mapping File (.vqm) that indicates the duplicated LUTs that the Quartus Prime software generated and/or resynthesized while fitting the design, and specify a new source. Otherwise, no action is required.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.